High Temperature Green Masking Tape - Solvent Resistant Automotive Paint Refinishing Adhesive

Bake Cycle Ready: Withstands high temperatures up to 130°C (266°F) for 40 minutes without adhesive failure.

Solvent Resistant: Natural rubber adhesive blocks penetration from automotive basecoats and clearcoats.

Contour Conformability: 155um crepe paper bends easily around irregular car body panels, side mirrors, and door handles.

Clean Release: Peels off cleanly from metal, glass, and rubber trims leaving no sticky residue after the bake cycle.

High Tensile Strength: Rated at >75 N/25mm to resist tearing and breaking when pulled from sharp metal edges.

Targeted Performance for Automotive Refinishing

Auto body shops require masking materials that perform under extreme heat and chemical exposure. This High Temperature Green Masking Tape (G190) features a specialized natural rubber adhesive built specifically for critical car paint refinishing. The 155um thick crepe paper acts as a secure physical barrier against overspray, holding firm along straight lines and complex body curves.

The tape tolerates baking oven temperatures up to 130°C (266°F) for 40 minutes. The natural rubber formula blocks solvents found in automotive paints from dissolving the adhesive, preventing messy cleanups and ruined paint jobs.

Key Material Advantages

• Strong Initial Tack: Achieves an initial tack value of ≥12 (No. ball), grabbing firmly to smooth metals and plastics instantly.
• 7% Elongation: The crepe paper stretches slightly to wrap around curved bumpers and window trims without snapping.
• No Bleed-Through: Seals tightly against flat and irregular surfaces to block paint from seeping under the edge.
• High Cohesion: Rated at ≥24H, preventing the tape from slipping or lifting during long application periods.

Application Scenarios

• Automotive Refinishing: Masks off body panels, glass, and rubber weather seals before spraying basecoats and clearcoats.
• Paint Baking Ovens: Maintains a tight seal and structural integrity during high-temperature paint curing cycles in spray booths.
• Industrial Coating: Protects metal machinery components and plastic parts during solvent-heavy industrial painting processes.
• Curved Surface Masking: Conforms smoothly to irregular shapes, preventing wrinkles on side mirrors and curved wheel arches.

1.Clean the Panel: Wipe down the car body with a wax and grease remover. The surface must be completely dry before masking.

2.Apply to Contours: Press the tape firmly around curves, using the 7% elongation to bend the crepe paper without snapping it.

3.Paint and Bake: Apply solvent-based paints and run the vehicle through the bake cycle.

4.Remove at an Angle: Pull the tape back slowly at a 45-degree angle while the paint is still warm for the cleanest release.